Difference between revisions of "Setup camera and such"

From Kandos Digital Embassy
Jump to: navigation, search
(→‎Connect to server)
(→‎= Temp/Humidity Sensor + dust)
 
(7 intermediate revisions by 3 users not shown)
Line 1: Line 1:
 
== Connect to server ==
 
== Connect to server ==
  
 +
=== Set up general ==
 +
# change host name = basestation-01, edit in /etc/hosts, and /etc/hostname then "sudo /etc/init.d/hostname.sh"
 
# eth0 connect inet DHCP
 
# eth0 connect inet DHCP
−
# get pigpio library, install.
+
 
−
# get dht22 example
+
=== Temp/Humidity Sensor + dust ==
−
# [http://www.raspberrypi.org/forums/viewtopic.php?p=515575 set up pigpiod at boot]
+
 
−
# make sensor script file and change chmod 755 for executable
+
[[File:Sensor_bb.png|thumbnail]]
 +
 
 +
* do with arduino.  following sketch with DHT11 library:
 +
 
 +
<nowiki>
 +
#include <dht.h>
 +
 
 +
/*
 +
Standalone Sketch to use with a Arduino UNO and a
 +
Sharp Optical Dust Sensor GP2Y1010AU0F
 +
*/
 +
 
 +
//
 +
//    FILE: dht11_test.ino
 +
//  AUTHOR: Rob Tillaart
 +
// VERSION: 0.1.01
 +
// PURPOSE: DHT library test sketch for DHT11 && Arduino
 +
//    URL:
 +
//
 +
// Released to the public domain
 +
//
 +
 
 +
dht DHT;
 +
 
 +
#define DHT11_PIN 4
 +
 
 +
int measurePin = 6; //Connect dust sensor to Arduino A0 pin
 +
int ledPower = 12;  //Connect 3 led driver pins of dust sensor to Arduino D2
 +
 
 +
int samplingTime = 280;
 +
int deltaTime = 40;
 +
int sleepTime = 9680;
 +
 
 +
float voMeasured = 0;
 +
float calcVoltage = 0;
 +
float dustDensity = 0;
 +
 
 +
void setup(){
 +
  Serial.begin(9600);
 +
  pinMode(ledPower,OUTPUT); // for dust sensor
 +
}
 +
 
 +
void loop(){
 +
    if (Serial.available() > 0) {
 +
      delay(1000);
 +
      sendData();
 +
      // clear buffer
 +
      while(Serial.available())
 +
      {
 +
        char t= Serial.read();
 +
      }
 +
    }
 +
}
 +
 
 +
float getFiltered() {
 +
  getDustLevel();
 +
  delay(200);
 +
  float d = getDustLevel();
 +
  delay(200);
 +
  d += getDustLevel();
 +
  delay(200);
 +
  d += getDustLevel();
 +
    delay(200);
 +
  d += getDustLevel();
 +
  return d/4;
 +
}
 +
 
 +
float getDustLevel() {
 +
  digitalWrite(ledPower,LOW); // power on the LED
 +
  delayMicroseconds(samplingTime);
 +
 
 +
  voMeasured = analogRead(measurePin); // read the dust value
 +
 
 +
  delayMicroseconds(deltaTime);
 +
  digitalWrite(ledPower,HIGH); // turn the LED off
 +
  delayMicroseconds(sleepTime);
 +
 
 +
  // 0 - 5V mapped to 0 - 1023 integer values
 +
  // recover voltage
 +
  calcVoltage = voMeasured * (5.0 / 1024.0);
 +
 
 +
  // linear eqaution taken from http://www.howmuchsnow.com/arduino/airquality/
 +
  // Chris Nafis (c) 2012
 +
  dustDensity = 0.17 * calcVoltage - 0.1;
 +
 
 +
  return dustDensity; // unit: mg/m3
 +
}
 +
 
 +
void sendData()
 +
{
 +
  float dust = getFiltered();
 +
 
 +
  // READ DATA
 +
  float temp = -100;
 +
  float humidity = -100;
 +
  int chk = DHT.read11(DHT11_PIN);
 +
  if (chk == DHTLIB_OK) {
 +
    humidity = DHT.humidity;
 +
    temp = DHT.temperature;
 +
  }
 +
  /*switch (chk)
 +
  {
 +
    case DHTLIB_OK:  
 +
Serial.print("OK,\t");
 +
break;
 +
    case DHTLIB_ERROR_CHECKSUM:
 +
Serial.print("Checksum error,\t");
 +
break;
 +
    case DHTLIB_ERROR_TIMEOUT:
 +
Serial.print("Time out error,\t");
 +
break;
 +
    case DHTLIB_ERROR_CONNECT:
 +
        Serial.print("Connect error,\t");
 +
        break;
 +
    case DHTLIB_ERROR_ACK_L:
 +
        Serial.print("Ack Low error,\t");
 +
        break;
 +
    case DHTLIB_ERROR_ACK_H:
 +
        Serial.print("Ack High error,\t");
 +
        break;
 +
    default:
 +
Serial.print("Unknown error,\t");
 +
break;
 +
  }*/
 +
 
 +
  // DISPLAY DATA
 +
  Serial.print("dust=");
 +
  Serial.print(dust);
 +
  Serial.print(",");
 +
  Serial.print("humidity=");
 +
  Serial.print(humidity);
 +
  Serial.print(",");
 +
  Serial.print("temp=");
 +
  Serial.println(temp);
 +
}
 +
</nowiki>
 +
 
 +
== pi ==
 +
 
 +
# make sensor script senddata.py and change chmod 755 for executable
 
  <nowiki>
 
  <nowiki>
 
#!/usr/bin/python
 
#!/usr/bin/python
−
#senddata.py
 
−
# get basestation
 
 
import sys
 
import sys
 
import time
 
import time
 +
import urllib
 +
import serial
 +
# get basestation
 
id = str(sys.argv[1])
 
id = str(sys.argv[1])
 
# set up pi and sensors
 
# set up pi and sensors
−
import os
+
ser = serial.Serial('/dev/ttyUSB0', 9600, timeout=10)
−
import urllib
+
# turn off serial DTR which resets Arduino
−
os.chdir('pigpio_dht22')
+
−
import pigpio
+
−
pi = pigpio.pi()
+
−
import DHT22
+
−
s = DHT22.sensor(pi, 4)
+
−
# get data
+
−
s.trigger()
+
 
time.sleep(1)
 
time.sleep(1)
−
print('{:3.2f}'.format(s.temperature() / 1.))
+
ser.setDTR(level=0)
−
print('{:3.2f}'.format(s.humidity() / 1.))
+
−
# send data, (download results to nowhere)
+
−
urllib.urlretrieve("http://digitalembassy.mesh/data/sensors/logData.php?basestation="+id+"&type=temp&value="+('%.2f' % s.temperature()), filename="/dev/null")
+
 
time.sleep(1)
 
time.sleep(1)
−
urllib.urlretrieve("http://digitalembassy.mesh/data/sensors/logData.php?basestation="+id+"&type=humidity&value="+('%.2f' % s.humidity()), filename="/dev/null")
+
# send beepboop to activate sensor reading
 +
ser.write('Yo!')
 +
time.sleep(2)
 +
str =  ser.readline()
 +
print  str
 +
types = str.split(',')
 +
for type in types:
 +
parts = type.split('=')
 +
# send data, (download results to nowhere)
 +
print parts[0] + " = " + parts[1]
 +
urllib.urlretrieve("http://digitalembassy.mesh/data/sensors/logData.php?basestation="+id+"&type="+parts[0]+"&value="+parts[1]), filename="/dev/null")
 +
time.sleep(1)
 +
 
 
# close
 
# close
−
#s.cancel()
 
−
#pi.stop()
 
−
#exit()
 
 
</nowiki>
 
</nowiki>
 
# set up crontab -e
 
# set up crontab -e
−
<nowiki>
 
−
crontab -e
 
−
</nowiki>
 
 
  <nowiki>
 
  <nowiki>
 
* * * * * /home/pi/senddata.py 1 >> /home/pi/cron_out.log
 
* * * * * /home/pi/senddata.py 1 >> /home/pi/cron_out.log
Line 45: Line 183:
 
sudo service cron restart
 
sudo service cron restart
 
</nowiki>
 
</nowiki>
−
# change host name = basestation-01, edit in /etc/hosts, and /etc/hostname then "sudo /etc/init.d/hostname.sh"
+
 
 +
=== Camera sending image to Server ===
 +
 
 +
# install sshpass
 +
<nowiki>
 +
sudo apt-get install sshpass
 +
</nowiki>
 +
# make sendimage in /home/pi, with chmod 755
 +
<nowiki>
 +
#!/bin/bash
 +
raspistill -vf -hf -o /home/pi/image.jpg
 +
sshpass -p '<password>' scp /home/pi/image.jpg pi@digitalembassy.mesh:/var/www/data/sensors/images/1.jpg
 +
sshpass -p '<password>' scp /home/pi/image.jpg pi@digitalembassy.mesh:/var/www/data/sensors/images/1-$(date +%F-%H:%M).jpg
 +
</nowiki>
 +
# add cron command to take image and upload to server
 +
*/5 * * * * /home/pi/sendimage
 +
# restart cron "sudo service cron restart"

Latest revision as of 02:27, 16 April 2015

Connect to server[edit]

= Set up general[edit]

  1. change host name = basestation-01, edit in /etc/hosts, and /etc/hostname then "sudo /etc/init.d/hostname.sh"
  2. eth0 connect inet DHCP

= Temp/Humidity Sensor + dust[edit]

Sensor bb.png
  • do with arduino. following sketch with DHT11 library: 
#include <dht.h>

/*
 Standalone Sketch to use with a Arduino UNO and a
 Sharp Optical Dust Sensor GP2Y1010AU0F
*/

//
//    FILE: dht11_test.ino
//  AUTHOR: Rob Tillaart
// VERSION: 0.1.01
// PURPOSE: DHT library test sketch for DHT11 && Arduino
//     URL:
//
// Released to the public domain
//

dht DHT;

#define DHT11_PIN 4
  
int measurePin = 6; //Connect dust sensor to Arduino A0 pin
int ledPower = 12;   //Connect 3 led driver pins of dust sensor to Arduino D2
  
int samplingTime = 280;
int deltaTime = 40;
int sleepTime = 9680;
  
float voMeasured = 0;
float calcVoltage = 0;
float dustDensity = 0;
  
void setup(){
  Serial.begin(9600);
  pinMode(ledPower,OUTPUT); // for dust sensor
}
  
void loop(){
    if (Serial.available() > 0) {
      delay(1000);
      sendData();
      // clear buffer
      while(Serial.available())
      {
         char t= Serial.read(); 
      }
    }
}

float getFiltered() {
  getDustLevel();
  delay(200);
  float d = getDustLevel();
  delay(200);
  d += getDustLevel();
  delay(200);
  d += getDustLevel();
    delay(200);
  d += getDustLevel();
  return d/4; 
}

float getDustLevel() {
  digitalWrite(ledPower,LOW); // power on the LED
  delayMicroseconds(samplingTime);
  
  voMeasured = analogRead(measurePin); // read the dust value
  
  delayMicroseconds(deltaTime);
  digitalWrite(ledPower,HIGH); // turn the LED off
  delayMicroseconds(sleepTime);
  
  // 0 - 5V mapped to 0 - 1023 integer values
  // recover voltage
  calcVoltage = voMeasured * (5.0 / 1024.0);
  
  // linear eqaution taken from http://www.howmuchsnow.com/arduino/airquality/
  // Chris Nafis (c) 2012
  dustDensity = 0.17 * calcVoltage - 0.1;
  
  return dustDensity; // unit: mg/m3
}

void sendData()
{
  float dust = getFiltered();
  
  // READ DATA
  float temp = -100;
  float humidity = -100;
  int chk = DHT.read11(DHT11_PIN);
  if (chk == DHTLIB_OK) {
    humidity = DHT.humidity;
    temp = DHT.temperature;
  }
  /*switch (chk)
  {
    case DHTLIB_OK:  
		Serial.print("OK,\t"); 
		break;
    case DHTLIB_ERROR_CHECKSUM: 
		Serial.print("Checksum error,\t"); 
		break;
    case DHTLIB_ERROR_TIMEOUT: 
		Serial.print("Time out error,\t"); 
		break;
    case DHTLIB_ERROR_CONNECT:
        Serial.print("Connect error,\t");
        break;
    case DHTLIB_ERROR_ACK_L:
        Serial.print("Ack Low error,\t");
        break;
    case DHTLIB_ERROR_ACK_H:
        Serial.print("Ack High error,\t");
        break;
    default: 
		Serial.print("Unknown error,\t"); 
		break;
  }*/
  
  // DISPLAY DATA
  Serial.print("dust=");
  Serial.print(dust);
  Serial.print(",");
  Serial.print("humidity=");
  Serial.print(humidity);
  Serial.print(",");
  Serial.print("temp=");
  Serial.println(temp);
}

pi[edit]

  1. make sensor script senddata.py and change chmod 755 for executable 
#!/usr/bin/python
import sys
import time
import urllib
import serial
# get basestation
id = str(sys.argv[1])
# set up pi and sensors
ser = serial.Serial('/dev/ttyUSB0', 9600, timeout=10)
# turn off serial DTR which resets Arduino 
time.sleep(1)
ser.setDTR(level=0)
time.sleep(1)
# send beepboop to activate sensor reading
ser.write('Yo!')
time.sleep(2)
str =  ser.readline()
print  str
types = str.split(',')
for type in types:
	parts = type.split('=')
	# send data, (download results to nowhere)
	print parts[0] + " = " + parts[1]
	urllib.urlretrieve("http://digitalembassy.mesh/data/sensors/logData.php?basestation="+id+"&type="+parts[0]+"&value="+parts[1]), filename="/dev/null")
	time.sleep(1)

# close
  1. set up crontab -e 
* * * * * /home/pi/senddata.py 1 >> /home/pi/cron_out.log


sudo service cron restart

Camera sending image to Server[edit]

  1. install sshpass 
 
sudo apt-get install sshpass
  1. make sendimage in /home/pi, with chmod 755 
#!/bin/bash
raspistill -vf -hf -o /home/pi/image.jpg
sshpass -p '<password>' scp /home/pi/image.jpg pi@digitalembassy.mesh:/var/www/data/sensors/images/1.jpg
sshpass -p '<password>' scp /home/pi/image.jpg pi@digitalembassy.mesh:/var/www/data/sensors/images/1-$(date +%F-%H:%M).jpg
  1. add cron command to take image and upload to server
  • /5 * * * * /home/pi/sendimage
  1. restart cron "sudo service cron restart"
Retrieved from "http://kandos.tacticalspace.org/index.php?title=Setup_camera_and_such&oldid=143"